Whenever a home’s water heater stops producing heated water it can quickly become a problem not only for the homeowner but for all those who life in the home. Without an ample supply of heated water, cleaning tasks of all types can become much more difficult. In addition, without hot water to help in killing bacteria and other types of germs, many items may appear clean but actually are not. Because this can cause harm to the household it is important for a homeowner to contact a repair person from a company who offers plumbing services in Tucson as quickly as possible.
Most repair persons will need to spend some time checking the system to ensure there is not a simple reason for the problem with the water heater. Many times a homeowner will contact a company who offers Plumbing Services because they think there is a problem with their water heating unit, yet it turns out to be a flipped breaker or a faulty gas line, which is causing the problem. Because of this, most professionals will want to inspect these elements thoroughly.
The repair person will also want to check the condition of the water remaining in the tank. To do this he or she will generally attach a hose to the drain valve near the bottom of the tank. After turning the water supply off, the water will be allowed to drain into a bucket. This will allow the technician from a business who handles plumbing services in Tucson to see the water and check it for any signs of sediment or mineral deposits.
This is important, as many times a water heater will not be able to produce hot water because of a buildup of sediment on the inside of the tank. This buildup prevents the heat exchange between the tank and the water. In this situation the water heater is working as it should, the sediment is just stopping the heat from making it to the water. This can often be fixed by flushing the system.
To flush the system the repair person will first make sure all the water is emptied from the tank. He or she will then turn the water back on to the unit and allow it to move straight through the unit and back out the hose attached to the drain valve. This will be done until the water coming out is clear.
