3 Factors to Consider When Planning a Commercial HVAC Installation...

Your company site needs new air conditioning. Not just any commercial unit will do. You want to select something that will keep the office space, production floor, and showroom at a comfortable temperature. As you consider your options for a new commercial HVAC installation, keep these factors in mind. The Square Footage the Unit Must Cool One of the first factors to consider is the size of the new industrial air conditioning unit you will be installing in Lake Charles. The unit must be powerful enough to adequately cool every area of the facility. This is where the expertise of a contractor will make a difference. After inspecting the space and determining what sort of insulation and other factors will influence the choice, the contractor can recommend a unit that will work properly. The Energy Rating Always pay close attention to the energy rating. The rating should usually be at least 8, although 11-12 is a better choice for many commercial properties. Remember that the higher energy rating the unit possesses, the more energy efficient it happens to be. While you may spend a little more for a unit with a higher rating, the cost will be offset by the utility savings that your new commercial HVAC installation generates. The Warranty and Service Contract Provisions Even after finding an option for commercial air conditioning that has the power and the energy rating that you need, there’s one more factor to consider closely. You want to ensure that the warranty and service provisions that come along with the commercial HVAC installation are reasonable and will help you if something goes wrong through no fault of your own. Ideally, the service contract will include a minimum number of free service calls for each calendar year, discounts...

Things a Professional Will Do When Hired to Perform AC Diagnostics in Kyle TX...

Dealing with the heat of summer can be extremely challenging without a functional HVAC unit. During this time of year, an HVAC will get used more, which means it is more likely to breakdown. When these problems occur, a homeowner needs to find a reputable and experienced HVAC technician to help them out. Having professional AC diagnostics in Kyle TX performed will help a homeowner get to the bottom of the problems they are currently dealing with. If a homeowner tries to perform these diagnostics on their own, they will make lots of mistakes. Here are some of the things a professional will do when hired to perform HVAC diagnostics. Check For Signs of Ice The first thing a technician will do when trying to diagnose the issues a unit has is to check for any icing. Often times, ice on the condenser coil will signify there are either refrigerant or air flow issues. If the air flow a unit has is clogged with dirt or dust, it will lead to it freezing up due to a lack of air flow. If this problem is being caused by a refrigerant leak, the technician will have to track down the source of this leak. Once they have fixed this issue, they can add more refrigerant and restore the functionality the unit has lost. Check the Overall Condition of the Unit Another important thing a technician will check when hired to diagnose HVAC repair problems is the overall condition of the unit. If the unit in question is over 10 years old, then it may be time to get a new one. If the professionals hired to do this job recommend a new unit, a homeowner needs to take notice of this warning and act. While...

Why Your Heat Pump Won’t Switch Between Heating and Cooling Mode...

This is the time of year when you’ll be grateful that you have a heat pump to address your warm- and cool-weather comfort requirements. As temperatures fluctuate, you can just switch the pump between its heating and cooling modes with a quick thermostat adjustment. However, if your heat pump won’t go into cooling mode, it may be time to schedule AC repair in West Chicago. Here, we’ll list some reasons why your heat pump may get stuck. Thermostat Troubles One of the most obvious reasons for a heat pump to get stuck is that the connection between the reversing valve and the thermostat has been cut. The thermostat uses wire connections to operate various parts of the pump, and if it can’t work the reversing valve, the pump will stay in its current mode. Another possibility is that the pump is not accurately sensing the indoor temperature, which prevents the thermostat from switching it over to cooling mode. A repair tech will address the situation by recalibrating the thermostat. A Malfunctioning Reversing Valve The valve we mentioned above is one of the components that make a heat pump different from a conventional AC unit. It controls the direction of refrigerant flow from the compressor and depending on that direction, the unit will be in either cooling or heating mode. Because it’s a mechanical part, it can become stuck or wear out, keeping the heat pump from switching between modes. With AC repair in West Chicago, the valve can easily be changed. To schedule repairs, routine maintenance, or a complete replacement, call us any time of the day or the night. We’re proud to provide service for all types of HVAC units, including heat pumps. Call Blue Frost Heating & Cooling or visit us at...

Air Conditioning Repair and Maintenance Tips for La Quinta, CA...

Air Conditioning Repair La Quinta, CA is a vital part of the overall upkeep of your home, and it increases the chances of worry-free operation during hotter times of the year. Proper maintenance of your system means less costly repairs, and that your AC will operate in an energy-efficient way. Many people have a hard time keeping up with their air conditioning unit’s maintenance because there are so many other projects to do. Below is an AC maintenance checklist that will allow you to keep up with this important job. The condensing unit: It is typically located outside, and you should make sure it is not blocked by grass, weeds and debris. The unit draws air into the AC system for inside circulation and cooling, but its operation can be hindered if it cannot bring in enough air. Some people cover the condenser to shield it from wind, rain and snow, but these units are designed for outside use. Testing the unit: During the early spring, turn on your AC unit and allow it to run for a short period (an hour or so). If there are problems, you can identify them early. It’s better to call an HVAC contractor at the beginning of the season before things get busy. Changing the filter: A dirty or clogged air filter impacts your system’s energy efficiency, and it can cause problems with the evaporator. If you have trouble remembering to change the filter, install one of the permanent variety, which can be cleaned rather than replaced. Checking obstructions and access panels: Once a year, check your access panels to make sure they are secure. Remove obstructions from the unit. Check your thermostat: Make sure it is set to cooling mode. Setting it below your chosen room...

Why Consider Air Conditioner Repair, Find an HVAC Professional in Chicago Loop...

Most homeowners in the Chicago Loop have A/C units because the weather is fickle and strange. The mornings might be cold and breezy while the afternoons are swelteringly hot. Whether you have health issues that make it tough to breathe in the high humidity or just want to be comfortable, the A/C is the best way to do that. When it’s on the fritz, you need professional air conditioner repair at chicago to get it fixed so that you remain comfortable. Low Humidity Most people think that air conditioning is just designed to cool the air that gets pumped into the house, but it also reduces humidity that’s in the air while it cools. That way, you are more comfortable regardless of how much moisture is in the outside air. The system sucks out the moisture so that you don’t feel sticky when the A/C runs. If your air conditioning doesn’t seem to be working correctly, or it runs but you still feel hot or sticky, it could be an indication that something is wrong. Get it checked out by a professional to determine the cause so that you can feel comfortable again. Air Quality Your air conditioning system doesn’t just cool the air; it is also designed to remove impurities from the air. The filtration system is advanced enough to keep out pollen, dust, and other allergens out of your home. If you notice that you’re sneezing more or having respiratory problems, it might indicate that the filtration system isn’t working correctly. Along with such, you may just need to change the filter. You can call in a professional for both needs. Air conditioner repair is essential to keep your system working smoothly and reduce energy costs. Visit Deljo Heating & Cooling in...

Signs that You Need Boiler Repair Find a Technician in Chicago...

Whenever the day seems dreary, nothing is better than taking a hot bath or shower. It can relax you, de-stress your muscles, and help you feel calm. However, when you hear sputtering, odd noises, or don’t get any hot water, it could be time for a boiler repair. Chicago residents shouldn’t be alarmed, as repairs are often necessary, especially as the days grow cold and your equipment gets older. Odd Noises If you notice that your boiler makes strange sounds that never happened before, it could be a sign that lime-scale and other deposits have built-up on the heat exchanger. It restricts water flow, which can lead to overheating and over-boiling. Therefore, you get those odd sounds. It isn’t necessarily an emergency, but you should call a technician to check everything. Cold Radiator When your radiators don’t heat up correctly or as much as they used to, you could have air buildup or sludge buildup. If the top of the radiator is cold, a bleed may be all that’s necessary. However, if the whole radiator is cold and doesn’t heat up, it could signal something more serious. Either way, it’s time to call an expert to help you deal with the issue. Turns off by Itself Boilers sometimes turn themselves on and off, which wastes energy and doesn’t heat your home efficiently. In some cases, it just means that you’ve got low water pressure. That could be caused by a closed valve or a thermostat problem. This issue isn’t an emergency, but it does waste energy, time, and money. Therefore, it’s best to have it checked as soon as you can. Boiler repair can be necessary for a variety of reasons, and it’s best to call a professional. Visit Heatmasters Heating & Cooling in...