; charset=UTF-8" /> Electronics and Electrical Archives - Articles Directories

How Recessed Lighting Brightens Your Life...

Recessed lighting has skyrocketed in popularity, and for good reason. It’s not just the minimalistic feel or the low profile effect of the lights. There are several other benefits that make a lot of homeowners choose recessed lighting in Wilmette. It Makes the Room Look Bigger The ceiling is an often-forgotten and important space in the room. As we look out into a room, the ceiling is present at least in our peripheral vision and therefore has a noticeable impact on the overall feel of the room. Recessed lighting, because it is set inside the ceiling, does not interrupt your upwards view. Hence, the room just extends outward smoothly, which makes it feel bigger than if a traditional light fixture were installed. It Can Be Used to Highlight Specific Walls If you have a work of art that is intended to add a specific aspect of character to the room, properly positioned recessed lighting can help accent it. Rooms with art should have the art emphasized in order for the room itself to benefit from the style and aesthetic appeal of artwork. Recessed lighting can help achieve this effect. By the same token, if one wall is painted a different color in order to complement something else in the room, recessed lighting near that wall can help to bring it out just a bit more, making the room come together nicely. It’s Safer Recessed lighting, due to its position inside the ceiling, is safer than a traditional light fixture. If a ball is tossed up against the ceiling, a youngster below won’t be showered with a cascade of sharp glass or be exposed to mercury from a burst bulb. It is also less of a target for an aspiring teenager looking to test his...

Full-Service Electrical Contractors in the Chicago Region...

Residences and commercial buildings throughout the Chicago area will naturally need electrical work, from new installations to upgrades. Experts are on hand in the area to meet this demand and are qualified to cover a wide range of tasks, from new construction work or renovations and retrofits to home lighting, AV systems, design-and-build services, outdoor lighting and security systems. Top-level Electricians Serving the North Shore and Greater Chicago The Chicago region, including Northbrook, Glenview, Wilmette, Evanston, Highland Park and Lake Forest, has professional electricians with years of experience, fully equipped to handle a wide array of services, including lighting repair or installation, general installation or upgrades for electrical panels. Electrical contractors also base their work on a solid base of engineering and quality commercial, residential or industrial workmanship for projects including healthcare or educational buildings or new constructions. They also cover unique instances, such as home generators or emergency electrical events. Services Available in the Winnetka Area Service isn’t far away with an electrician near me in Winnetka or the surrounding areas. Services can be called upon for repair, installation or maintenance, including: Charging stations for electric cars Emergency or non-emergency calls Chandelier installation Electrical upgrades Radiant floor heating Service for circuit breakers Eco-friendly lighting New constructions Remodels for kitchens and baths Regular maintenance Corrections for code violations Recessed lighting Call an Experienced Electrical Contractor in the Winnetka Area For a full-service electrician near me in Winnetka, Northfield, Kenilworth, Glencoe, the North Shore or the Chicago area, expert residential, industrial and commercial electrical installations are a phone call away. Contact Current Electrical Contractors at 847-832-0700 or visit website today. 1 person likes this...

New Considerations For Advanced Printed Circuit Board Design...

One of the most noticeable trends in all types of equipment, systems, machines, and devices is the evolution of the technology seems to continue to speed up, and it is not hitting a plateau or slowing down. This evolution impacts all types of electronics and computerized components and systems from simple kitchen devices to the increasing complexity of the devices we use every day for work, entertainment, and even to operate as implantable medical devices controlling systems in the body. With all types of technology advancing at a rapid pace, it is not surprising that the need for advanced printed circuit board design is a factor in designing these new devices and systems. The need for contract manufacturers to have the advanced PCB design skills needed by OEMs with cutting edge products is becoming a driving force in moving some contract manufacturers into the role as industry leaders. Some of the new trends in printed circuit board design that continue to be a focus into this new decade include: Increased ability to connect – one of the issues for many OEMs is to create equipment, machines, systems, and devices that are ready to connect to the IoT (Internet of Things). Designing this feature into systems is a marketing and customer support basic for many different things used on a daily basis. More power in less space (High density interconnect)– as the need for more compact but more powerful systems in all types of devices continues, the requirement for increasingly complex and much higher power PCBs becomes a driving factor. Use of simulations – to address everything from high power applications to advanced security on specific types of printed circuit board design, the use of virtual testing and simulations using technology Specialized companies offering PCB...

The Beneficial Qualities of X-Ray Tubes Designed for Continuous Use...

Getting better results with your analysis means looking outside the traditional designs of X-ray tubes currently on the market. You want to source your products from X-ray tube manufacturers that understand how critical it is to have dependable, continuous-use deliverance systems. Enjoy a safer part that gives you high-quality results on a continual basis. Complements Smaller and Tighter Areas The need for continuous X-ray operation can be frustrating when the area available for the tube is small and cramped. One readily-available solution is micro-sized tubes with bendable components that fit in nearly any small location. It’s tubes that provide the same beaming capabilities of larger tubes. Flexible materials in their construction make it a more efficient delivery system for continuous use and activity. You’ll never have to compromise on the quality of your qualitative and quantitative analysis. The improvement in results and consistency are immediate. Heat Reduction Capabilities One of the most common reasons failure in X-ray rubes happen is due to the inability to release heat with continuous use. The addition of air-flow mechanisms is not enough to limit their lifespan to a mere two or four years. You need X-ray tube manufacturers offering tubes that can handle the variety of power spectrums needed while dissipating the heat build-up effectively. Eliminate Internal and External Arcing Arcing is a significant problem that can cause the failure of the X-ray tube and the equipment it’s housed within. Electrical arcing can also prove dangerous for anyone near the equipment. Choose a manufacturer that helps eliminate internal arcing by using dielectric oil specifically formulated to combat this problem. Pick a tube design that performs without the high voltage well of most traditional models. Contact Micro X-Ray, Inc for more information about the benefits of having the right...

Three Main Advantages of Buying a Ceiling Fan at a Chicago Lighting Store...

Ceiling fans are a great asset to have during the summer. They keep the average temperatures in most rooms as much as eight degrees cooler. However, rather than purchase a cheap ceiling fan at any hardware outlet, it pays to get one at a reputable lighting gallery store. Here’s why. Expertise and Knowledge A lighting gallery store already has the expertise of installing lighting fixtures. Therefore, it can easily install your ceiling fan as well. You’ll also receive a high-quality ceiling fan that will last at least a decade. These types of ceiling fans Chicago also have better air flow, which will help reduce your energy usage. Recommend Right Model The outlay of your house and ceilings will vary from other people’s homes. A lighting fixture distributor understands this dynamic and can recommend the right ceiling fan for each room. For example, if you have a high vaulted ceiling in your master bedroom, you’ll likely need a down rod mounted ceiling fan. A standard flush model is usually adequate for ceilings of average height. Wide Selection When you purchase ceiling fans Chicago from lighting gallery stores, you’ll enjoy a much wider variety from which to choose. Some of these models include dual motor fans, huggers, wall fans and even outdoor patio ceiling fans. Your lighting gallery store representative will help you find fans with the right look and pitch. Because a lighting gallery store purchases ceiling fans in quantity, you’ll get a fair price on whichever ceiling fans you choose. They’ll also come with warranties, meaning you’ll receive free service if you experience any problems. Fox Lighting Galleries has been selling high quality lighting fixtures in the Chicago area for more than 50 years, but it also sells ceiling fans and crystal home decor....

EMC Antenna Equipment Configurations and Benefits of Renting...

When considering EMC amplifier and antenna rentals, it pays to go into the process with a deeper understanding of the different configurations available for this electronic equipment. Consider four basic types of EMC antenna so you know which type to rent to meet your existing needs. The most common is a single-element unit called a biconical antenna. Experts say these are the most commonly misused. Essentially, a biconical antenna is a broad-bandwidth device constructed with two conical conductive parts. They nearly touch at their points. They are used for EMI (electromagnetic interference) testing, but also emissions testing.Another configuration of the EMC antenna is the multi-element design. The most common kind is called a Log Periodic. These perform well across all wide bandwidths, making it an effective instrument for EMC testing. There is no theoretical limit of the frequency coverage it can handle. There will be some cable and/or transmission line loss, however.The third kind of EMC antenna is the horn and ridged horn antenna. They have higher gain. This makes them popular for military standard testing. Horned and double-ridged horns combine high gain with excellent broadband coverage. The fourth kind of EMC antenna are those that make use of parabolic reflectors. They have remarkably high gain and narrow beam width. They are often used for the reception of weak microwave signals because of their high efficiency and ease of fabrication.With this bare-bones introduction of the basic types of EMC antennas, consider the benefits of EMC amplifier and antenna rental as opposed to purchasing. Rental allows you to test equipment without a large outlay of cash. It also enables you to try different brands before you buy. Renting allows you to meet your short-term testing requirements or you can increase your testing capabilities on a...