Carpets require regular cleaning especially in high foot traffic areas such as offices and hospitals. When you select a commercial carpet cleaning company, you must ensure that the cleaning method is effective in cleaning the carpet. Commercial carpet cleaners use different cleaning methods to remove dirt, dust, and other contaminants. You must select carpet cleaners that use the most effective method in cleaning the carpets. Below are 4 popular methods used in commercial carpet cleaning in New York City.
1. Dry Carpet Cleaning Method
Dry carpet cleaning was invented in 1980s. The carpet cleaning method is ideal for commercial offices that operate round the clock and cannot be disturbed due to carpet cleaning process. The dry cleaning method can use different cleaning powders that are applied on the carpet fiber. A motorized rotating brush is used to open up the carpet fiber and allow the powder to settle inside. This results in deep thorough carpet cleaning process.
2. Encapsulation Cleaning Method
Encapsulation is another effective method for commercial cleaning of the carpet. The foam encapsulation technique uses synthetic detergents that turns into powder form when they are dried. Loose dirt particles will become trapped into the power when the cleaning foam dries after which they can be brushed off the carpet.
The technique has shown great cleaning results. Still, the encapsulation cleaning method cannot clean very dirty and heavily soiled carpets due to limitation of technology.
3. Bonnet Cleaning Method
Bonnet cleaning method entails cleaning top of the carpet fiber using motorized machine that comes with a spinning pad. The spinning pad is dipped into cleaning solution that absorbs dirt and dust from the carpet surface.
The bonnet cleaning method is popular in hotels and gives them the perfect solution to clean carpet in high traffic areas. The carpet is cleaned quickly without much wetness and dries quickly without causing any inconvenience to the guests. The bonnet cleaning method also does not clean dirt and dust hidden deep beneath the caret layers.
4. Steam Carpet Cleaning Method
The steam carpet cleaning method is also known as hot water extraction method. The carpet cleaning methods agitate the carpet fiber by using high pressure water to dissolve dirt and other debris from the carpet. The cleaning method is ideal for cleaning heavily soiled carpets that cannot be cleaned by other methods. An average office site of 3,000 sq ft will normally take 2 hours to clean the carpet.
The above were just a sample of cleaning methods used in commercial carpet cleaning in New York. You must research carefully about the different methods and select a carpet cleaning company that offers the best method in cleaning your carpets.
